Mardi Gras SF 2018 [Encore Publication]: A case study on shooting action in low light

San Francisco has been celebrating Carnaval for 40 years, and for the past 5 years I’ve been documenting this wonderful event.  The anniversary season officially kicked off last night with San Francisco’s take on Mardi Gras.  I covered the small parade through SF’s historic Mission District and also the performances of several comparsas (like krewes or samba schools) at one of the event’s venues.  Today’s post showcases some of my favorite images from this year’s Mardi Gras while also serving as a case study for shooting fast action in extremely low light conditions.

Taking the approach of “if you can’t beat them, join them,” remember that when shooting action in low light it is okay occasionally to intentionally allow some motion blur to emphasize the movement.  Here I achieved a soft painterly effect by choosing a slower shutter speed to capture this image of a young dancer mustering for the parade.

The use of flash is required for much low-light action photography, but that doesn’t mean your images have to be harsh or unnatural looking.  A few hints: 1) Get the flash off your camera using a flash cord or remote control; 2) Use balanced fill flash instead of automatic flash for a more realistic look; 3) Dial down the flash’s power by using flash exposure compensation (I use -1 stop most of the time); 4) These settings often will require that you use a high ISO setting and a fast lens.

Use a fast prime lens to achieve a fast shutter speed along with a relatively shallow aperture to freeze and isolate your subject.  Most of these images were made with a 50mm f/1.4 lens.

In post-processing your images, consider these tips: 1) Apply some noise reduction to mitigate the digital noise associated with high-ISO shooting; 2) Adjust the white balance to render the colors you remember from the shoot (always shoot in RAW mode if possible to allow setting the white balance during post-processing); 3) Apply a touch of post-crop vignetting to emphasize your subject and reduce background clutter.

For group shots, try to find an uncluttered background and pose everyone as tightly as possible so that your fill flash will illuminate them evenly.  Don’t use a wide-angle lens for group shots!  Sure, doing so will make it easier to fit in all the subjects, but it also provides a very unflattering perspective for most people.  Here I shot with a 50mm “normal” lens and moved back to fit in the entire group.

Portraits work very well using balanced fill-flash techniques.  Be sure to find an uncluttered background and get the flash unit off the camera.  Here I bounced the flash off the awning of a building to achieve a soft effect relatively unencumbered by shadows.

By applying some of these techniques, you can capture fast-moving action even under extremely low-light conditions and still achieve realistic looking and flattering results.

Do you have suggestions for shooting action in low light?  Please share your thoughts here.

Want to read more posts about photographic techniques?  Find them all here: Posts about techniques.  And remember that all the images featured in this post as well as thousands more are available for viewing or purchase on my website–just click on any photo to view it in more detail.

Mardi Gras SF 2018 [Encore Publication]: A case study on shooting action in low light

San Francisco has been celebrating Carnaval for 40 years, and for the past 5 years I’ve been documenting this wonderful event.  The anniversary season officially kicked off last night with San Francisco’s take on Mardi Gras.  I covered the small parade through SF’s historic Mission District and also the performances of several comparsas (like krewes or samba schools) at one of the event’s venues.  Today’s post showcases some of my favorite images from this year’s Mardi Gras while also serving as a case study for shooting fast action in extremely low light conditions.

Taking the approach of “if you can’t beat them, join them,” remember that when shooting action in low light it is okay occasionally to intentionally allow some motion blur to emphasize the movement.  Here I achieved a soft painterly effect by choosing a slower shutter speed to capture this image of a young dancer mustering for the parade.

The use of flash is required for much low-light action photography, but that doesn’t mean your images have to be harsh or unnatural looking.  A few hints: 1) Get the flash off your camera using a flash cord or remote control; 2) Use balanced fill flash instead of automatic flash for a more realistic look; 3) Dial down the flash’s power by using flash exposure compensation (I use -1 stop most of the time); 4) These settings often will require that you use a high ISO setting and a fast lens.

Use a fast prime lens to achieve a fast shutter speed along with a relatively shallow aperture to freeze and isolate your subject.  Most of these images were made with a 50mm f/1.4 lens.

In post-processing your images, consider these tips: 1) Apply some noise reduction to mitigate the digital noise associated with high-ISO shooting; 2) Adjust the white balance to render the colors you remember from the shoot (always shoot in RAW mode if possible to allow setting the white balance during post-processing); 3) Apply a touch of post-crop vignetting to emphasize your subject and reduce background clutter.

For group shots, try to find an uncluttered background and pose everyone as tightly as possible so that your fill flash will illuminate them evenly.  Don’t use a wide-angle lens for group shots!  Sure, doing so will make it easier to fit in all the subjects, but it also provides a very unflattering perspective for most people.  Here I shot with a 50mm “normal” lens and moved back to fit in the entire group.

Portraits work very well using balanced fill-flash techniques.  Be sure to find an uncluttered background and get the flash unit off the camera.  Here I bounced the flash off the awning of a building to achieve a soft effect relatively unencumbered by shadows.

By applying some of these techniques, you can capture fast-moving action even under extremely low-light conditions and still achieve realistic looking and flattering results.

Do you have suggestions for shooting action in low light?  Please share your thoughts here.

Want to read more posts about photographic techniques?  Find them all here: Posts about techniques.  And remember that all the images featured in this post as well as thousands more are available for viewing or purchase on my website–just click on any photo to view it in more detail.

Mardi Gras SF 2018 [Encore Publication]: A case study on shooting action in low light

San Francisco has been celebrating Carnaval for 40 years, and for the past 5 years I’ve been documenting this wonderful event.  The anniversary season officially kicked off last night with San Francisco’s take on Mardi Gras.  I covered the small parade through SF’s historic Mission District and also the performances of several comparsas (like krewes or samba schools) at one of the event’s venues.  Today’s post showcases some of my favorite images from this year’s Mardi Gras while also serving as a case study for shooting fast action in extremely low light conditions.

Taking the approach of “if you can’t beat them, join them,” remember that when shooting action in low light it is okay occasionally to intentionally allow some motion blur to emphasize the movement.  Here I achieved a soft painterly effect by choosing a slower shutter speed to capture this image of a young dancer mustering for the parade.

The use of flash is required for much low-light action photography, but that doesn’t mean your images have to be harsh or unnatural looking.  A few hints: 1) Get the flash off your camera using a flash cord or remote control; 2) Use balanced fill flash instead of automatic flash for a more realistic look; 3) Dial down the flash’s power by using flash exposure compensation (I use -1 stop most of the time); 4) These settings often will require that you use a high ISO setting and a fast lens.

Use a fast prime lens to achieve a fast shutter speed along with a relatively shallow aperture to freeze and isolate your subject.  Most of these images were made with a 50mm f/1.4 lens.

In post-processing your images, consider these tips: 1) Apply some noise reduction to mitigate the digital noise associated with high-ISO shooting; 2) Adjust the white balance to render the colors you remember from the shoot (always shoot in RAW mode if possible to allow setting the white balance during post-processing); 3) Apply a touch of post-crop vignetting to emphasize your subject and reduce background clutter.

For group shots, try to find an uncluttered background and pose everyone as tightly as possible so that your fill flash will illuminate them evenly.  Don’t use a wide-angle lens for group shots!  Sure, doing so will make it easier to fit in all the subjects, but it also provides a very unflattering perspective for most people.  Here I shot with a 50mm “normal” lens and moved back to fit in the entire group.

Portraits work very well using balanced fill-flash techniques.  Be sure to find an uncluttered background and get the flash unit off the camera.  Here I bounced the flash off the awning of a building to achieve a soft effect relatively unencumbered by shadows.

By applying some of these techniques, you can capture fast-moving action even under extremely low-light conditions and still achieve realistic looking and flattering results.

Do you have suggestions for shooting action in low light?  Please share your thoughts here.

Want to read more posts about photographic techniques?  Find them all here: Posts about techniques.  And remember that all the images featured in this post as well as thousands more are available for viewing or purchase on my website–just click on any photo to view it in more detail.

Mardi Gras SF 2018: A case study on shooting action in low light

San Francisco has been celebrating Carnaval for 40 years, and for the past 5 years I’ve been documenting this wonderful event.  The anniversary season officially kicked off last night with San Francisco’s take on Mardi Gras.  I covered the small parade through SF’s historic Mission District and also the performances of several comparsas (like krewes or samba schools) at one of the event’s venues.  Today’s post showcases some of my favorite images from this year’s Mardi Gras while also serving as a case study for shooting fast action in extremely low light conditions.

Taking the approach of “if you can’t beat them, join them,” remember that when shooting action in low light it is okay occasionally to intentionally allow some motion blur to emphasize the movement.  Here I achieved a soft painterly effect by choosing a slower shutter speed to capture this image of a young dancer mustering for the parade.

The use of flash is required for much low-light action photography, but that doesn’t mean your images have to be harsh or unnatural looking.  A few hints: 1) Get the flash off your camera using a flash cord or remote control; 2) Use balanced fill flash instead of automatic flash for a more realistic look; 3) Dial down the flash’s power by using flash exposure compensation (I use -1 stop most of the time); 4) These settings often will require that you use a high ISO setting and a fast lens.

Use a fast prime lens to achieve a fast shutter speed along with a relatively shallow aperture to freeze and isolate your subject.  Most of these images were made with a 50mm f/1.4 lens.

In post-processing your images, consider these tips: 1) Apply some noise reduction to mitigate the digital noise associated with high-ISO shooting; 2) Adjust the white balance to render the colors you remember from the shoot (always shoot in RAW mode if possible to allow setting the white balance during post-processing); 3) Apply a touch of post-crop vignetting to emphasize your subject and reduce background clutter.

For group shots, try to find an uncluttered background and pose everyone as tightly as possible so that your fill flash will illuminate them evenly.  Don’t use a wide-angle lens for group shots!  Sure, doing so will make it easier to fit in all the subjects, but it also provides a very unflattering perspective for most people.  Here I shot with a 50mm “normal” lens and moved back to fit in the entire group.

Portraits work very well using balanced fill-flash techniques.  Be sure to find an uncluttered background and get the flash unit off the camera.  Here I bounced the flash off the awning of a building to achieve a soft effect relatively unencumbered by shadows.

By applying some of these techniques, you can capture fast-moving action even under extremely low-light conditions and still achieve realistic looking and flattering results.

Do you have suggestions for shooting action in low light?  Please share your thoughts here.

Want to read more posts about photographic techniques?  Find them all here: Posts about techniques.  And remember that all the images featured in this post as well as thousands more are available for viewing or purchase on my website–just click on any photo to view it in more detail.

Mardi Gras SF 2018: A case study on shooting action in low light

San Francisco has been celebrating Carnaval for 40 years, and for the past 5 years I’ve been documenting this wonderful event.  The anniversary season officially kicked off last night with San Francisco’s take on Mardi Gras.  I covered the small parade through SF’s historic Mission District and also the performances of several comparsas (like krewes or samba schools) at one of the event’s venues.  Today’s post showcases some of my favorite images from this year’s Mardi Gras while also serving as a case study for shooting fast action in extremely low light conditions.

Taking the approach of “if you can’t beat them, join them,” remember that when shooting action in low light it is okay occasionally to intentionally allow some motion blur to emphasize the movement.  Here I achieved a soft painterly effect by choosing a slower shutter speed to capture this image of a young dancer mustering for the parade.

The use of flash is required for much low-light action photography, but that doesn’t mean your images have to be harsh or unnatural looking.  A few hints: 1) Get the flash off your camera using a flash cord or remote control; 2) Use balanced fill flash instead of automatic flash for a more realistic look; 3) Dial down the flash’s power by using flash exposure compensation (I use -1 stop most of the time); 4) These settings often will require that you use a high ISO setting and a fast lens.

Use a fast prime lens to achieve a fast shutter speed along with a relatively shallow aperture to freeze and isolate your subject.  Most of these images were made with a 50mm f/1.4 lens.

In post-processing your images, consider these tips: 1) Apply some noise reduction to mitigate the digital noise associated with high-ISO shooting; 2) Adjust the white balance to render the colors you remember from the shoot (always shoot in RAW mode if possible to allow setting the white balance during post-processing); 3) Apply a touch of post-crop vignetting to emphasize your subject and reduce background clutter.

For group shots, try to find an uncluttered background and pose everyone as tightly as possible so that your fill flash will illuminate them evenly.  Don’t use a wide-angle lens for group shots!  Sure, doing so will make it easier to fit in all the subjects, but it also provides a very unflattering perspective for most people.  Here I shot with a 50mm “normal” lens and moved back to fit in the entire group.

Portraits work very well using balanced fill-flash techniques.  Be sure to find an uncluttered background and get the flash unit off the camera.  Here I bounced the flash off the awning of a building to achieve a soft effect relatively unencumbered by shadows.

By applying some of these techniques, you can capture fast-moving action even under extremely low-light conditions and still achieve realistic looking and flattering results.

Do you have suggestions for shooting action in low light?  Please share your thoughts here.

Want to read more posts about photographic techniques?  Find them all here: Posts about techniques.  And remember that all the images featured in this post as well as thousands more are available for viewing or purchase on my website–just click on any photo to view it in more detail.

Not My Circus, Not My Monkeys [Encore Publication]: How to shoot a live performance with fast action and challenging lighting

Recently I had the opportunity to shoot a live performance by Circus Automatic, a talented young San Francisco-based circus troupe.  Indoor performances, where the action is fast and the lighting dim and unpredictable, can be extremely challenging to shoot.  In this post I share some images from the circus show as well as a few tips on how to make the best of these difficult conditions.

The first tip is to use a fast lens and a high ISO setting.  Since you will need a shutter speed of 1/200 second or faster in order to freeze most of the action, and given that the light is often very dim, you will likely have to use an ISO of at least 1600 and perhaps quite a bit higher, even when using a fast f/1.8 or f/2.8 lens wide open.  All of these images were made shooting wide-open with my favorite portrait lens, the Nikon 85mm f/1.8.  ISO ranged from 800-3200, and shutter speeds ranged from 1/160 to 1/800 second.

To capture this striking image of the aerialist, I shot wide-open with a fast prime lens and used a high ISO setting in order to obtain a fast enough shutter speed to freeze her action.  Buy this photo

The second tip is to seek the drama present in all aspects of the show.  Sometimes the most interesting subject is not the star performer.  In this image I captured the expressions of the rest of the cast as they watched the star of the final act.

Part of the fun of a circus is getting to know the cast members, who tend to be very interesting and photogenic characters even aside from their remarkable performing abilities.  Look for the “side shows” as well as the “big top” acts.  Buy this photo

During our “intermission,” let’s review some basic rules for shooting an indoor performance: 1) Get permission from the producer before you bring your camera to the show; 2) never use flash (it annoys your neighbors and can cause injury or even death by blinding an unsuspecting aerialist); 3) use your camera’s quietest shutter mode and disable its LCD display so as not to distract those around you; and 4) don’t attempt to use a tripod or monopod unless you’ve obtained special permission.

My next tip is to look for those moments when the action subsides naturally.  In most kinds of fast-action performances, including dance, sports, and yes, circus acts, there are brief moments of stasis when the motion is swinging from one direction to another.  Even a juggler balancing on a teeter-totter placed precariously atop a pile of four metal cylinders will reach moments of relative rest.  Here I fired the shutter at the exact instant when two of the batons are in his hands while the third has just reached its apogee.  This image encapsulates all of the excitement of the act but has almost no perceptible motion blur.

Find those brief moments when the fast action settles into a natural lull.  Buy this photo

Another tip is to shoot in RAW mode.  That’s a good practice for nearly all types of photography, but for indoor performances the color of the lighting is often very tricky and rapidly changing, so using RAW files allows much greater control over the color temperature during post-processing.  The venue for last night’s show used awful single-colored LED lights that cast a very strange temperature over many of my images.  Some I could correct in post-processing, but others remain unnatural looking and cold.  Regrettably, these LED lights are becoming very popular so this is a common challenge when shooting live indoor events.  Other useful post-processing techniques for these types of shows include noise reduction (required due to the high ISO settings) and image sharpening.

The final tip is to keep shooting, because you rarely can tell in advance when something remarkable may happen!

Parting shot: The acrobat dismounts dramatically to end the show.  Buy this photo

Now it’s your turn.  Please share your experiences and advice for shooting live performances.

Want to read more posts about photographic techniques?  Find them all here: Posts on Techniques.

 

Not My Circus, Not My Monkeys [Encore Publication]: How to shoot a live performance with fast action and challenging lighting

Last night I had the opportunity to shoot a live performance by Circus Automatic, a talented young San Francisco-based circus troupe.  Indoor performances, where the action is fast and the lighting dim and unpredictable, can be extremely challenging to shoot.  In this post I share some images from the circus show as well as a few tips on how to make the best of these difficult conditions.

The first tip is to use a fast lens and a high ISO setting.  Since you will need a shutter speed of 1/200 second or faster in order to freeze most of the action, and given that the light is often very dim, you will likely have to use an ISO of at least 1600 and perhaps quite a bit higher, even when using a fast f/1.8 or f/2.8 lens wide open.  All of these images were made shooting wide-open with my favorite portrait lens, the Nikon 85mm f/1.8.  ISO ranged from 800-3200, and shutter speeds ranged from 1/160 to 1/800 second.

To capture this striking image of the aerialist, I shot wide-open with a fast prime lens and used a high ISO setting in order to obtain a fast enough shutter speed to freeze her action.  Buy this photo

The second tip is to seek the drama present in all aspects of the show.  Sometimes the most interesting subject is not the star performer.  In this image I captured the expressions of the rest of the cast as they watched the star of the final act.

Part of the fun of a circus is getting to know the cast members, who tend to be very interesting and photogenic characters even aside from their remarkable performing abilities.  Look for the “side shows” as well as the “big top” acts.  Buy this photo

During our “intermission,” let’s review some basic rules for shooting an indoor performance: 1) Get permission from the producer before you bring your camera to the show; 2) never use flash (it annoys your neighbors and can cause injury or even death by blinding an unsuspecting aerialist); 3) use your camera’s quietest shutter mode and disable its LCD display so as not to distract those around you; and 4) don’t attempt to use a tripod or monopod unless you’ve obtained special permission.

My next tip is to look for those moments when the action subsides naturally.  In most kinds of fast-action performances, including dance, sports, and yes, circus acts, there are brief moments of stasis when the motion is swinging from one direction to another.  Even a juggler balancing on a teeter-totter placed precariously atop a pile of four metal cylinders will reach moments of relative rest.  Here I fired the shutter at the exact instant when two of the batons are in his hands while the third has just reached its apogee.  This image encapsulates all of the excitement of the act but has almost no perceptible motion blur.

Find those brief moments when the fast action settles into a natural lull.  Buy this photo

Another tip is to shoot in RAW mode.  That’s a good practice for nearly all types of photography, but for indoor performances the color of the lighting is often very tricky and rapidly changing, so using RAW files allows much greater control over the color temperature during post-processing.  The venue for last night’s show used awful single-colored LED lights that cast a very strange temperature over many of my images.  Some I could correct in post-processing, but others remain unnatural looking and cold.  Regrettably, these LED lights are becoming very popular so this is a common challenge when shooting live indoor events.  Other useful post-processing techniques for these types of shows include noise reduction (required due to the high ISO settings) and image sharpening.

The final tip is to keep shooting, because you rarely can tell in advance when something remarkable may happen!

Parting shot: The acrobat dismounts dramatically to end the show.  Buy this photo

Now it’s your turn.  Please share your experiences and advice for shooting live performances.

Want to read more posts about photographic techniques?  Find them all here: Posts on Techniques.

Not My Circus, Not My Monkeys [Encore Publication]: How to shoot a live performance with fast action and challenging lighting

Last night I had the opportunity to shoot a live performance by Circus Automatic, a talented young San Francisco-based circus troupe.  Indoor performances, where the action is fast and the lighting dim and unpredictable, can be extremely challenging to shoot.  In this post I share some images from the circus show as well as a few tips on how to make the best of these difficult conditions.

The first tip is to use a fast lens and a high ISO setting.  Since you will need a shutter speed of 1/200 second or faster in order to freeze most of the action, and given that the light is often very dim, you will likely have to use an ISO of at least 1600 and perhaps quite a bit higher, even when using a fast f/1.8 or f/2.8 lens wide open.  All of these images were made shooting wide-open with my favorite portrait lens, the Nikon 85mm f/1.8.  ISO ranged from 800-3200, and shutter speeds ranged from 1/160 to 1/800 second.

To capture this striking image of the aerialist, I shot wide-open with a fast prime lens and used a high ISO setting in order to obtain a fast enough shutter speed to freeze her action.  Buy this photo

The second tip is to seek the drama present in all aspects of the show.  Sometimes the most interesting subject is not the star performer.  In this image I captured the expressions of the rest of the cast as they watched the star of the final act.

Part of the fun of a circus is getting to know the cast members, who tend to be very interesting and photogenic characters even aside from their remarkable performing abilities.  Look for the “side shows” as well as the “big top” acts.  Buy this photo

During our “intermission,” let’s review some basic rules for shooting an indoor performance: 1) Get permission from the producer before you bring your camera to the show; 2) never use flash (it annoys your neighbors and can cause injury or even death by blinding an unsuspecting aerialist); 3) use your camera’s quietest shutter mode and disable its LCD display so as not to distract those around you; and 4) don’t attempt to use a tripod or monopod unless you’ve obtained special permission.

My next tip is to look for those moments when the action subsides naturally.  In most kinds of fast-action performances, including dance, sports, and yes, circus acts, there are brief moments of stasis when the motion is swinging from one direction to another.  Even a juggler balancing on a teeter-totter placed precariously atop a pile of four metal cylinders will reach moments of relative rest.  Here I fired the shutter at the exact instant when two of the batons are in his hands while the third has just reached its apogee.  This image encapsulates all of the excitement of the act but has almost no perceptible motion blur.

Find those brief moments when the fast action settles into a natural lull.  Buy this photo

Another tip is to shoot in RAW mode.  That’s a good practice for nearly all types of photography, but for indoor performances the color of the lighting is often very tricky and rapidly changing, so using RAW files allows much greater control over the color temperature during post-processing.  The venue for last night’s show used awful single-colored LED lights that cast a very strange temperature over many of my images.  Some I could correct in post-processing, but others remain unnatural looking and cold.  Regrettably, these LED lights are becoming very popular so this is a common challenge when shooting live indoor events.  Other useful post-processing techniques for these types of shows include noise reduction (required due to the high ISO settings) and image sharpening.

The final tip is to keep shooting, because you rarely can tell in advance when something remarkable may happen!

Parting shot: The acrobat dismounts dramatically to end the show.  Buy this photo

Now it’s your turn.  Please share your experiences and advice for shooting live performances.

Want to read more posts about photographic techniques?  Find them all here: Posts on Techniques.

Not My Circus, Not My Monkeys: How to shoot a live performance with fast action and challenging lighting

 

Last night I had the opportunity to shoot a live performance by Circus Automatic, a talented young San Francisco-based circus troupe.  Indoor performances, where the action is fast and the lighting dim and unpredictable, can be extremely challenging to shoot.  In this post I share some images from the circus show as well as a few tips on how to make the best of these difficult conditions.

The first tip is to use a fast lens and a high ISO setting.  Since you will need a shutter speed of 1/200 second or faster in order to freeze most of the action, and given that the light is often very dim, you will likely have to use an ISO of at least 1600 and perhaps quite a bit higher, even when using a fast f/1.8 or f/2.8 lens wide open.  All of these images were made shooting wide-open with my favorite portrait lens, the Nikon 85mm f/1.8.  ISO ranged from 800-3200, and shutter speeds ranged from 1/160 to 1/800 second.

To capture this striking image of the aerialist, I shot wide-open with a fast prime lens and used a high ISO setting in order to obtain a fast enough shutter speed to freeze her action.  Buy this photo

The second tip is to seek the drama present in all aspects of the show.  Sometimes the most interesting subject is not the star performer.  In this image I captured the expressions of the rest of the cast as they watched the star of the final act.

Part of the fun of a circus is getting to know the cast members, who tend to be very interesting and photogenic characters even aside from their remarkable performing abilities.  Look for the “side shows” as well as the “big top” acts.  Buy this photo

During our “intermission,” let’s review some basic rules for shooting an indoor performance: 1) Get permission from the producer before you bring your camera to the show; 2) never use flash (it annoys your neighbors and can cause injury or even death by blinding an unsuspecting aerialist); 3) use your camera’s quietest shutter mode and disable its LCD display so as not to distract those around you; and 4) don’t attempt to use a tripod or monopod unless you’ve obtained special permission.

My next tip is to look for those moments when the action subsides naturally.  In most kinds of fast-action performances, including dance, sports, and yes, circus acts, there are brief moments of stasis when the motion is swinging from one direction to another.  Even a juggler balancing on a teeter-totter placed precariously atop a pile of four metal cylinders will reach moments of relative rest.  Here I fired the shutter at the exact instant when two of the batons are in his hands while the third has just reached its apogee.  This image encapsulates all of the excitement of the act but has almost no perceptible motion blur.

Find those brief moments when the fast action settles into a natural lull.  Buy this photo

Another tip is to shoot in RAW mode.  That’s a good practice for nearly all types of photography, but for indoor performances the color of the lighting is often very tricky and rapidly changing, so using RAW files allows much greater control over the color temperature during post-processing.  The venue for last night’s show used awful single-colored LED lights that cast a very strange temperature over many of my images.  Some I could correct in post-processing, but others remain unnatural looking and cold.  Regrettably, these LED lights are becoming very popular so this is a common challenge when shooting live indoor events.  Other useful post-processing techniques for these types of shows include noise reduction (required due to the high ISO settings) and image sharpening.

The final tip is to keep shooting, because you rarely can tell in advance when something remarkable may happen!

Parting shot: The acrobat dismounts dramatically to end the show.  Buy this photo

Now it’s your turn.  Please share your experiences and advice for shooting live performances.